MaxGRAB base print vinyl with a brighly coloured wavey graphic and FlooR11 slip rated floor graphic laminate being installed with a heat gun and soft roller outside onto tarmac.
  • Matt white standard & Matt white high opacity monomeric face films
  • Solvent, Latex and UV printable
  • MaxGRAB permanent clear UV polyacrylate adhesive
  • 140gsm backprinted PE coated liner
  • External life of 3-6 months
  • Fire rated EN13501-1 and BS476 Class 0
  • Widths of 1370mm and 1600mm

All Nu-Print ‘M’ Series films on this page feature MaxGRAB (M) adhesives.

MaxGRAB (M) adhesive is commonly used for external applications onto extremely difficult to stick to surfaces.

Nu-Print ‘M’ Series MaxGRAB print vinyls offer 2 matt white face films, in standard opacity and high opacity.

Commonly used for Point Of Sale (PoS) and wayfinding floor & wall applications, these films offer cost effective, high quality print results.

The high coat weight MaxGRAB adhesive is ideal for applications onto rough external surfaces, such as concrete, bricks, asphalt, tarmac etc. as the adhesive will flow in to the valleys increasing the adhesive contact area.

When MaxGRAB print films are applied to floors they must be used in conjunction with a suitable outdoor slip rated laminate.

For floor applications the durability is 3 to 6 months.

Class 0 fire rated.

Standard

M15-M-P
80µ matt white monomeric face film.
MaxGRAB permanent clear UV polyacrylate adhesive.
140gsm backprinted PE coated liner.
External life of 3-6 months.
Fire rated.

Technical Data Sheet
Fire Cert – EN13501-1
Fire Cert – BS476, Class 0

    I consent to being contacted by email:
    YesNo

    I consent to being contacted by telephone:
    YesNo

    High Opacity (Coverall Films)

    M16-M-P
    High opacity, 80µ matt white monomeric face film.
    MaxGRAB permanent clear UV polyacrylate adhesive.
    140gsm backprinted PE coated liner.
    External life of 3-6 months.
    Fire rated.

    Technical Data Sheet
    Fire Cert – EN13501-1
    Fire Cert – BS476, Class 0

      I consent to being contacted by email:
      YesNo

      I consent to being contacted by telephone:
      YesNo

      The complete Nu-Print ‘M’ Series range of monomeric print vinyls offer gloss and matt face films in standard and high opacity options, plus clear transparent films that can be printed or used as matched laminates.

      The full Nu-Print ‘M’ Series also offers 4 levels of adhesive to suit your specific application.
      For each of the 4 adhesive strengths there are also additional airXit (X) adhesive options that enable a fast, easy, bubble free and dry application choice:

      Back